Panasonic NV-J45 Series - Manual (Page 30)

Timer Recording (Cont’d)
For Everyday Recording
When programming an everyday recording using the bar
codes, you have the choice between 3 different modes:
Sunday through Saturday ( 1 ) , Monday through Friday ( 2 ) ,
and Monday through Saturday ( 3 ) .
(SU—SA)
□ lllllllll
I
1
(MO—FR)
□ lllllllll
I
2
(MO-SA)
□
I
3
1
Turn on the Digital Scanner and trace the
“CHANNEL” bar code.
2
Trace the desired “EVERYDAY” bar code { 1 , 2 , 3 ) .
(SU-SA)
□-
SU MO TU WE TH FR SA
T
I
ON OFF
3
Trace the bar codes for “START TIME”, “END TIME”
and “RECORDING”, and transmit the data to the VTR.
SU MO TU WE TH FR SA
1 SP
ON
8
n n
• u u
OFF
m n n
4 U U U
> Everyday recording will be performed from that day on.
> If a “DATE” bar code is traced after tracing the
“EVERYDAY” bar code, everyday recording will not be
performed.
For Everyweek Recording
1 Turn on the Digital Scanner and trace the
“CHANNEL” bar code.
2
Trace the bar code for the desired day of the week
among the “EVERYWEEK” bar codes.
EVERYWEEK
Sunday-
Monday-
T uesday-
Wednesday-
Thursday—
Friday--------
Saturday
0
II
m
■HI
3
Trace the bar codes for “START TIME”, “END TIME”
and "RECORDING”, and transmit the data to the VTR.
SU
ON
8 SP
OFF
nn n n
C u u u
¿ ¿ . n n
u u
• Everyweek recording will be performed from that week
on.
• If a “DATE” bar code is traced after tracing the
“EVERYWEEK” bar code, everyweek recording will not
be performed,
To Confirm the Programme of a Timer Recording_______
To perform this operation, the VTR must be turned on or it
must be in the timer recording standby mode (H indication
is lit).
1 Trace the “CHECK" bar code.
CHECK
r
2 Perform transmission.
• After releasing the Transmit Button, the
programmed data will be displayed for about
12 seconds on the Multi-Function Display.
• At every push of the Transmit Button, the timer
programme number advances to the next higher
number.
To Cancel a Programmed Timer Recording
To perform this operation, the VTR must be turned on but
not be in any of the recording or playback operation
modes, or it must be in the timer recording standby mode
{H indication is lit). To cancel a programmed timer
recording, its data must be displayed on the Multi-Function
Display. If they are no longer displayed, first, trace the
“CHECK” bar code and perform transmission (several
times, if necessary, until the programme you want to
cancel is displayed). Then, within 12 seconds:
1 Trace the “CANCEL” bar code.
2
Perform transmission.
• To programme a new timer recording, perform the
programming from the beginning.
(
30
)