Setting the tuner in the vtr (cont’d), Oh©-s – Panasonic NV-J45 Series User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting the Tuner in the VTR (Cont’d)

CLOCK PROG/

RECORDING TRACKING/V-LOCK TIMER REG VTR/TV

Oh©-s@-@

©-©•©

PRESET/ t_____________ a _

FINE/NORMAL BAND/AFC CUAR

1*4

1-3

3-2

2.2

Blanking of Unoccupied Programme Position

\t\onsf~S’jC'f7n<}Je

Press the Preset/Fine/Norma! Button.

Press the Channel Up or Down Button to select a
programme position (channel) which you do not want

to tune to a TV station.

Press the Clear Button (“—” will be displayed in the

Programme Position Indication).

• Repeat steps 2 and 3 for any programme positions

on which no stations are to be tuned. Afterwards,
these programme positions will be skipped during

Up/Down selection of the programme position.

Press the Preset/Fine/Normal Button twice.

Cancelling the Clear Function (Blanking)

Press the Preset/Fine/Normal Button.

To cancel the blanking of a programme position,
select that programme position on the VTR and then
press the Clear Button.

Press the Preset/Fine/Normal Button twice.

How to Select the Programme Position (Channel) on

the Remote Controller

select channel

press button

1-9

respective channel

2 0

11-99

for example 32

If more than 5 seconds pass between the first, second and

third push, the channel will not be changed normally.

To select the “A1" programme position;

Press the Input Signal Selector.

To select the signals which are input via Audio Input

Socket and Video Input Socket, select the “A1 ’’
programme position.

(

)