Panasonic NV-J45 Series - Manual (Page 23)

Timer Recording
The programming of timer recordings is possible both on
the VTR itself and via the Remote Control Unit.
Programming of as many as 8 timer recording is possible
up to one month in advance.
Preparation
• Make sure that the clock shows the present time
correctly.
• Make sure that the Timer Record Function is set to “Off’
• Insert a video cassette with the erasure prevention tab
intact.
When a video cassette is already inside the VTR, press
the VTR On/Off Switch to turn it on.
For Example:
Programming a timer recording for a TV programme that
will be broadcast on Wednesday, October 27, from 10:30
to 11:45, on programme position (channel) 12, on timer
programme number 2. (Present date= October 10, 1999)
1 Press the Programme/Check Button to select the next
unoccupied timer programme number.
• Press the Tape Speed Selector Button until the
Indicator of the desired tape speed (“SP” or “LP "} is
lit in the Multi-Function Display.
SP
^ : i ^
^ I ^
ON
Press the “-t-” o r B u t t o n to select the programme
position (channel) on which the TV programme will be
broadcast.
iqpl
SP
ON
4
Press the “-h” or Button to set the date.
SP
WE
ON
------------------------------------------- '
Press the Next Button.
Press the “-E’’ or Button to select the hour of the
starting time of the TV programme.
i
[qpl
2
WE
SP
ON i
V
----------------------- ^¿44^^----------- i
7
Press the Next Button.
8 Press the “-f-’’ or Button to select the minute of
the starting time of the TV programme.
9
Press the Next Button.
10 Press the ‘‘-i-’’ or Button to select the hour of the
end time of the TV programme.
11 Press the Next Button.
12 Press the o r B u t t o n to select the minute of
the end time of the TV programme.
13 Press the Timer Record Button.
• The tape speed (SP/LP) can be selected in any of
the steps 1 to 12.
3 Press the Next Button.
(
23
)