Panasonic NV-J45 Series - Manual (Page 16)

Playback
REW/®--------- PLAY----------©/FF STOP PAUSE/STILL
© © © 0 © O
5 14 2 3
Preparation
• Make sure that the Tinner Record Function is set to “Off”.
• Insert a recorded video cassette.
When a video cassette is already inside the VTR, press
the VTR On/Off Switch to turn it on.
•Turn the TV set on and select the video playback
channel.
• Set the Noise Filter/Edit Selector to “Off".
1 Normal Playback
Press the Play Button (►).
PLAY
©
Control the picture as you like with the Picture
Sharpness Control (sharp or soft contours).
2 To Finish Playback
Press the Stop Button (■) to stop the playback.
3
Super Still Playback
When the VTR is in the playback mode, press the
Pause/Still Button ( I I ) to view a still-picture. To continue
the normal playback, press the Play Button (►) or this
button again.
PAUSE/STILL ©
If you leave the VTR in the still playback mode for
more than 5 minutes, the VTR will automatically
switch over to the Stop mode to protect the tape
and the video heads.
4 Cue Playback_______________________________
When the Fast Forward ►►/Cue Q Button is kept
pressed while the VTR is in the playback mode, the tape
will be played back at high speed in forward direction.
5 Review Playback
When the Rewind ◄◄/Review @ Button Is kept pressed
while thè VTR is in the playback mode, the tape will be
played back at high speed in reverse direction.
r * •
To make possible Cue or Review playback without
having to keep the respective button pressed__________
Press the Fast Forward ►►/Cue Q Button or the Rewind
◄◄/Review Q Button once only, then release.
To switch the VTR back to normal playback, press the
Play Button (►).
• When Cue or Review playback continues for more than
10 minutes, the VTR will automatically switch back to the
normal playback mode.
(
16
)