Panasonic NV-J45 Series - Manual (Page 22)

Super OTR Function (One-Touch Timer Recording)
This convenient function makes it possible to easily
programme the VTR for recording of TV programmes with
immediate start by precisely setting ending time to the
desired minute, and the VTR will automatically turn itself
off when the recording ends.
mm
1
— OFF +
2
Preparation
• insert a video cassette with the erasure prevention tab
intact.
When a video cassette is already inside the VTR, press
the VTR On/Off Switch to turn it on.
• Make sure that the clock shows the present time
correctly.
• Set the Tape Speed Selector to “SP” or “LP”.
OTR Function with Immediate Start
For example; OTR recording of a TV programme
broadcast to 11:00.
1
Select the programme position (channel) to be
recorded.
2
Press the OTR Off “+"or Button to set the OTR
ending time to 11:00.
fool
SP
*...i 0
su
OFF
OTR
• The “OTR" indicator will be displayed.
I When a video cassette with broken out tab is inserted,
the indication will flash, and an alarm sound will be
produced to indicate that recording is not possible.
»When quickly and repeatedly pressing the OTR Off “+"
or Button, the corresponding time indication changes
in 1 -minute steps. When it is kept pressed, the indication
changes in 10-minute steps.
»The VTR will automatically switch off, when the OTR is
completed. To turn the VTR on again, press the VTR
On/Off Switch.
When the Programme/Check Button is pressed once, the
present time will be displayed.
IMl
SP
su
OTR
When the Clock/Counter Selector Button (Remote
Controller) is pressed during OTR recording, the display
will change over to the counter mode.
• When the tape reaches its end during an OTR the
VTR will turn itself off.
• Make sure that the OTR Function (One-Touch
Timer Recording) does not overlap a programmed
timer recording. An OTR always takes precedence
over a timer recording.
• It is possible to change the OTR ending time even
during the recording.
• To interrupt an OTR, press the VTR On/Off Switch
to turn the VTR off.
(
22
)