Panasonic OMNIVISION PV-S9670 - Manual (Page 9)

Important: If the remote control POWER, ACTION, PROG, CHA/T, INDEX/ M/A SKIP, NUMBERED keys,
INPUT, TAPE POSITION, or ADD/DLT button does not work when pressed, press the VCR button
on the remote and try the button again.
6
ENTER CODE NUMBER
REFERRING TO MANUAL
SELECT:* T KEY
SET :► KEY
END
:ACT I ON KEY
'I Select cable box or
DSS receiver code.
(Refer to the list on page 7.)
1) Press AT to
select.
2) Press ► to
enter.
If cable box or DSS receiver has no remote control, select “NO
REMOTE.” Then, go to “Alternate Instructions” on page 11.
This determines whether VCR will control cable box or DSS receiver.
7 If Cable Box
PLEASE TUNE YOUR CABLE
BOX TO
CH02.
If OSS Receiver
PLEASE TUNE YOUR DSS
RECEIVER TO CH 270.
PROCEED:► KEY
END
: ACTION KEY
Tune Cable box or DSS
Receiver channel.
1) If Cable box,
tune it to
channel 02.
If DSS receiver,
tune it to
channel 270.
2) Press ► to
continue.
“NOW TRANSMITTING" appears.
8
----------i If Cable Box
(S YOUR CABLE BOX
RECEIVING CH 09 ?
YES
(SSI
If DSS Receiver
IS YOUR DSS RECEIVER
RECEIVING CH 200?
YES
IM
SELECT:* ▼ KEY
SET :► KEY
END
;ACTION KEY
Set receiver channel.
1) Press AT to
select “YES”
or “NO.”
2) Press ► to
enter.
If “YES” with cable box,
go to step 9.
If “YES” with DSS
receiver, go to “Alternate
Instructions” on page 11.
If “NO,” the screen in step 6 will appear. Try entering a different code
and/ or repositioning the equipment (see page 7.)
It still “NO,” cable box or DSS receiver is not available.
For channel and clock auto set, press ACTION to display the “SET
UP CHANNEL” screen. Then, press
AW to select “AUTO SET.”
Now, press ► and CHA to start.
9
PLEASE ENTER YOUR LOCAL
PBS CHANNEL ON CABLE BOX
saa
SELECT
SET
END * ▼ KEY
► KEY
ACTION KEY
Confirm that cable box
is on and that DSS
receiver is off.
Select local PBS channel
on cable box.
1) Press AT to
select.
2) Press ► to
set.
Continued on the next page...