Reset all vcr memory functions, Prevent accidental tape erasure, Dst (daylight saving time) – Panasonic OMNIVISION PV-S9670 User Manual
Page 44: Vcr & cassette information
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

VCR & Cassette Information
Reset All VCR Memory Functions
Use when moving VCR to new location, or if a mistake
was made in the One Time VCR Setup section.
• Make sure a tape is not inserted in the VCR.
Press and hold both PLAY
and CHANNEL A on the VCR
for more than 5 seconds.
• The power will shut off.
3 Do “One Time VCR Setup” steps on page 8.
Prevent Accidental Tape Erasure
Break off the tab.
Tab
Screw driver
DST (Daylight Saving Time)
VCR auto adjusts clock for DST. (Page 11.)
Spring (First Sunday in April)
DST:ON --> sets clock ahead one hour.
NORMAL TIME
1:00 a.m. 2:00 a.m.
DAYLIGHT
SAVING TIME
3:00 a.m. 4:00 a.m.
Autumn (Last Sunday in October)
DST:ON --> Turns clock back one hour.
DAYLIGHT
SAVING TIME
1:00 a.m. 2:00 a.m.
NORMAL TIME
1:00 a.m. 2:00 a.m.
If your area does not observe Daylight Saving
Time, select DST:OFF.
Keep these time changes in mind when
programming the VCR for timer recordings.
Record/Playback Time
Only use tapes with the mark in this unit.
Tape Speed
Setting
Type of Video Cassette
T60
T120
T160
SP
(Standard Play)
1 Hour
2 Hours
2 Hours
40 Minutes
LP
(Long Play)
2 Hours
4 Hours
5 Hours
20 Minutes
SLP
(Super Long Play)
3 Hours
6 Hours
8 Hours
44
For assistance, call 1-800-211-PANA(7262).