Warpia SWP120A Installation Manual & Troubleshooting Guide - Manual (Page 32)

StreamHD Installation Guide
32
Right click the DisplayLink System Tray icon and select Mirror from the
context menu.
· The resolution, color depth and refresh rate of the primary screen are
duplicated on the display connected to the Base Adapter.
· If the display connected to the Base Adapter supports a lower resolution than
the primary display, the primary graphics device will have its resolution
changed automatically to ensure the whole picture fits on the additional
display screen.
· If the display screen connected to the Base Adapter is larger than the primary
screen, the image will be adjusted to a letter-box frame to preserve the
correct aspect ratio.
Note:
When changing from Extend to Mirror mode, it is recommended to
first set the Display to Off, and then set to Mirror.
S etting E xtend Mode in Windows XP /Vis ta
To set the display to Extend mode:
Right click the DisplayLink System Tray icon and select Extend from the
context menu. You can also select the Extend To option to specify which side of
the extended space is occupied by the extended display.
Note:
When changing from Mirror to Extend mode, it is recommended to