Configuring the display, Setting options for the display – Warpia SWP120A Installation Manual & Troubleshooting Guide User Manual
Page 26
StreamHD Installation Guide
26
Menu Option
Description
the list, Pairing must be performed.
Rename
Allows you to change device name as it appears on the
Wireless USB Manager.
Properties
Displays the properties screen for this device.
Configuring the Display
S etting options for the dis play
The following are the suggested work configurations when connecting a display
screen to the Base Adapter:
· Mirror Mode
· Extend Mode
· Laptop with Lid Closed
· External Display Only
Note:
On Windows XP/Vista, the display properties for the Base Adapter
can be configured in two ways: as described in
Display > In Windows XP/Vista > via the Display Icon Context Menu
or as described in
Configuring the Display > in Windows XP/Vista >
via Windows Display Properties
On Windows 7, refer to
Configuring Display in Windows 7.
When changing settings, or during first connection between the PC
Adapter and the StreamHD adapter, the PC display may flicker or
turn on and off as the screen resolution is being automatically
adjusted.
This section describes the different modes that can be set. In
Configuring the Display > In Windows 7
you
will find the procedures for configuring these modes.
Us ing Mirror mode
Mirror mode is used to display the identical content on the additional screen as is
shown on the main PC/Laptop screen. Mirror mode is generally used to display
the PC contents on a larger or higher definition display. In Mirror mode the default
resolution is chosen based on the common denominator between the PC and the
additional screen, therefore, for most PCs, 1080p will not be supported.