Warpia SWP130A User Manual
Quickstart guide, Streamhd mac edition – swp130a

1. SOFTWARE INSTALLATION:
Prior to installing the Warpia StreamHD software it is important to make sure there
is no prior installation of Wireless USB or Display Link software from Warpia or
other companies. IF YOU HAVE THIS SOFTWARE IN YOUR SYSTEM, THIS WILL
CAUSE THE STREAMHD SOFTWARE TO NOT WORK PROPERLY.
If you see either Wireless USB or Display Link programs, first uninstall them before
continuing. Next, Insert the StreamHD installation CD into the PC and begin the
software installation by running the Warpia UWB Installer file. Ensure that the PC
Adapter is NOT plugged into the PC at this time.
StreamHD Mac Edition – SWP130A
Quickstart Guide
5. CONFIGURING AUDIO SETTINGS:
With Mac OS X, audio playback can be from either the PC speakers or from the TV (or
other external speakers), attached to the StreamHD. The default when connecting the
StreamHD is the PC speakers. To use the StreamHD’s connected device to playback
audio, follow the below instructions.
Open System Preferences and select the Sound icon
To select the appropriate Display
Resolution for each monitor, highlight
the Display tab in both Display
windows, then select from the
available display resolutions.
Usually the best resolution for each
Monitor will be the highest available
resolution shown.
There will be a choice between Internal Speakers and USB PnP Sound Device.
Select USB PnP Sound Device to playback audio through the StreamHD’s HDMI,
3.5mm or S/PDIF connections. Select Internal Speakers to playback audio
through the PC speakers.
For full details of installations procedures and troubleshooting for all Mac
®
Operating Systems, refer to the installation manual available on the installation CD,
or online at www.warpia.com/support
To Contact Support: [email protected]
Open System Preferences and select the Sound icon
TThere will be a choice between
kers
Internal Speak
and U
Select USB PnP Sound Device to playback audio through the
Select USB PnP Sound Device to playback audio
33.5mm or S/PDIF connections. Select
Speakers
Internal
thhrough the PC speakers.