Belt Drives CC-140 - Manual (Page 16)

53. Apply red loctite to frame holes and reinstall foot peg and mounting bracket, torque to spec.
54. Install primary oil drain plug with new o ring / gasket,
55. Adjust primary chain to OEM specification, while using adjuster on bottom of primary cover look
into top inspection hole for correct chain tension. SEE FIG.#29
FIGURE #29
56. Using a flexible funnel or funnel and a hose add the correct amount of transmission & primary
chain case lubricant, See Service manual for correct amount. SEE FIG.#30
FIGURE #30
57. Start bike and listen to the clutch, it will sound a little different, the (42) ball bearings make little
noise as they move , Thank You for choosing Belt Drives Ltd. Products, Enjoy your new Competitor
Clutch.