Vernier Data Pro - Manual (Page 25)

Data Pro 23
Graph Matching presents distance vs. time and velocity vs. time graphs, and
challenges you to match the graph. Tap
, and you will be presented with
a random distance graph for you to match.
Tapping
will start data collection so your data will be graphed in real
time, for 10 seconds.
Tap
to try matching the same graph, tap to be presented with a
new graph to be matched, or tap to do a run with no graph initially
showing. Tap to return to Data Pro.
Tap on the y-axis label, DIST (m), to change to a velocity vs. time match. Or,
you can simply tap on the label, (m, or m/s), to change from SI units to
English units (e.g., ft, or ft/s). To change from VEL (m/s) back to distance,
simply tap on the VEL (m/s) label and choose DIST (m) again.
By selecting the Remote mode, the Palm can set up LabPro for remote data collection. LabPro
can be removed from the Palm for data collection, then attached to the computer for data
importing to Vernier Graphical Analysis or Vernier Logger Pro program.
The Collection Setup screen will be presented where you can set up the data
collection parameters.
Follow the instructions to set up your LabPro for remote data collection.