Cabletron Systems SMARTSWITCH ROUTER 9032578-05 - Manual (Page 34)

Chapter 1: Introduction
8 SmartSwitch Router User Reference Manual
Ctrl-k Kill line from cursor to end of line
Ctrl-l Refresh current line
Ctrl-m Carriage return (executes command)
Ctrl-n Next command from history buffer
Ctrl-o None
Ctrl-p Previous command from history buffer
Ctrl-q None
Ctrl-r Refresh current line
Ctrl-s None
Ctrl-t Transpose character under cursor with the character just prior to the
cursor
Ctrl-u Delete line from the beginning of line to cursor
Ctrl-v None
Ctrl-w None
Ctrl-x Move forward one word
Ctrl-y Paste back what was deleted by the previous Ctrl-k or Ctrl-w command.
Text is pasted back at the cursor location
Ctrl-z If inside a subsystem, it exits back to the top level. If in Enable mode, it
exits back to User mode. If in Configure mode, it exits back to Enable
mode.
ESC-b Move backward one word
ESC-d Kill word from cursor’s current location until the first white space.
ESC-f Move forward one word
ESC-
BackSpace Delete backwards from cursor to the previous space (essentially a delete-
word-backward command)
SPACE Attempts to complete command keyword. If word is not expected to be a
keyword, the space character is inserted.
!* Show all commands currently stored in the history buffer.
!# Recall a specific history command. ‘#’ is the number of the history
command to be recalled as shown via the ‘!*’ command.
Table 1. CLI Line Editing Commands
Command Resulting Action