Setting an ip qos policy, Specifying precedence for an ip qos policy, Configuring ipx qos policies – Cabletron Systems SMARTSWITCH ROUTER 9032578-05 User Manual
Page 323: Setting an ipx qos policy
SmartSwitch Router User Reference Manual
297
Chapter 21: QoS Configuration Guide
Setting an IP QoS Policy
To set a QoS policy on an IP traffic flow, enter the following command in Configure mode:
For example, the following command assigns control priority to any traffic coming from
the 10.10.11.0 network:
Specifying Precedence for an IP QoS Policy
To specify the precedence for an IP QoS policy, enter the following command in Configure
mode:
Configuring IPX QoS Policies
To configure an IPX QoS policy, perform the following tasks:
1.
Identify the Layer-3 or 4 flow, and set the IPX QoS policy.
2.
Specify the precedence for the fields within an IPX flow.
Setting an IPX QoS Policy
To set a QoS policy on an IPX traffic flow, enter the following command in Configure
mode:
Set an IP QoS policy.
qos set ip
|any
|any
|any
|any
|any
|
|any
|any
any
rewrite>|
any
any
ssr(config)# qos set ip xyz control 10.10.11.0/24
Specify precedence for an
IP QoS policy.
qos precedence ip [sip
] [dip
]
[srcport
] [destport
]
[tos
] [protocol
] [intf
]
Set an IPX QoS policy.
qos set ipx
|any
|any
|any
|any
|any
|any
|
list>
|any