Cabletron Systems SMARTSWITCH ROUTER 9032578-05 - Manual (Page 278)

Chapter 18: IPX Routing Configuration Guide
252 SmartSwitch Router User Reference Manual
Configuring IPX Interfaces and Parameters
This section provides an overview of configuring various IPX parameters and setting up
IPX interfaces.
Configuring IPX Addresses to Ports
You can configure one IPX interface directly to a physical port.
To configure an IPX interface to a port, enter the following command in Configure mode:
Configuring Secondary Addresses on an IPX Interface
You can configure secondary addresses on an IPX interface.
To configure a secondary address on an IPX interface, enter the following command in
Configure mode:
Note: Configuring a secondary address on an IPX interface requires updated SSR
hardware. Please refer to
Appendix A for details.
Configuring IPX Interfaces for a VLAN
You can configure one IPX interface per VLAN.
To configure a VLAN with an IPX interface, enter the following command in Configure
mode:
Configure an IPX interface to a
physical port. interface create ipx address-
mask port
Add a secondary address and
encapsulation type to an
existing IPX interface. interface add ipx address
output-mac-
encapsulation
Create an IPX interface for a
VLAN. interface create ipx
address-mask vlan