Pilz PSEN cs4.1a - Manual (Page 21)

PSEN cs4.1a/b/p/M12
Operating Manual PSEN cs4.1a/b/p/M12
22187-EN-02
21
Electrical data 541111 541112
Max. cable capacitance at the safe-
ty outputs
No-load, PNOZ with relay con-
tacts 400 nF 400 nF
PNOZmulti, PNOZelog, PSS 400 nF 400 nF
Max. inrush current impulse
Current pulse, A1 0,58 A 0,58 A
Pulse duration, A1 1,0000 ms 1,0000 ms
Max. overall cable resistance Rl-
max
Single-channel at UB DC 1000 Ohm 1000 Ohm
Inputs 541111 541112
Number 2 2
Voltage at inputs 24 V DC 24 V DC
Input current range 5,0 mA 5,0 mA
Potential isolation between input
and voltage for the internal module
bus No No
Semiconductor outputs 541111 541112
OSSD safety outputs 2 2
Signal outputs 1 1
Potential isolation from system volt-
age No No
Short circuit-proof Yes Yes
Times 541111 541112
Test pulse duration, safety outputs 450 µs 450 µs
Switch-on delay
After UB is applied 1,0 s 1,0 s
Inputs typ. 13 ms 13 ms
Inputs max. 20 ms 20 ms
Actuator typ. 45 ms 45 ms
Actuator max. 120 ms 120 ms
Delay-on de-energisation
Inputs typ. 15 ms 15 ms
Inputs max. 20 ms 20 ms
Actuator typ. 40 ms 40 ms
Actuator max. 260 ms 260 ms
Supply interruption before de-ener-
gisation in the input circuit 10,0 ms 10,0 ms
Simultaneity, channel 1 and 2 ∞ ∞
Environmental data 541111 541112
Ambient temperature
In accordance with the standard EN 60068-2-14 EN 60068-2-14
Temperature range -25 - 70 °C -25 - 70 °C
Storage temperature
In accordance with the standard EN 60068-2-1/-2 EN 60068-2-1/-2
Temperature range -25 - 70 °C -25 - 70 °C