MK Diamond MK-2000 Gas Saws - Manual (Page 19)

19
Fill throat
Upper Limit
(D)
Install Fuel Cap.
1. Gasoline is highly flammable and explosive. You can be burned or seriously
injured when handling fuel.
2. To fuel, stop engine if running, and allow it to cool.
3. Refuel in a well-ventilated area.
4. Keep gasoline away from appliance pilot lights, barbecues, electric appliances,
power tools, etc.
5. Wipe up spills immediately.
1. Fuel can damage paint and plastic. Be careful not to spill fuel when filling the fuel tank.
Damage caused by spilled fuel IS NOt covered under the warranty.
2. DO NOT use stale or contaminated gasoline, or an oil/gasoline mixture.
3. If using a stand with the MK-2000 Gas Saw, a ladder meeting OSHA
specification is recommended.
4. Use unleaded gasoline with a pump octane rating of 86 or higher.
(C)
Verify fuel level is below the
throat of the Fuel tank.
(B)
Fill Fuel tank.
(A)
Remove Fuel Cap.
FILLING FUEL TANK
NOTE:
WARNING
MK-2000 GAS SAW OPERATION
Refer to the Engine Manual for your specific saw. NOTE: