MK Diamond MK-2000 Gas Saws - Manual (Page 18)

18
MK-2000 GAS SAW DIAMOND BLADE
Refer to the Engine Manual for your specific engine.
When installing the Oil Dipstick, ensure the threads are aligned with the threads of the Oil
Reservoir so as not to “cross-thread” the dipstick.
(C)
Fill Oil Reservoir.
(B)
Remove Dipstick.
(A)
Level Cutting Head and motor.
(F)
Clean up.
(E)
Install Dipstick.
(D)
Add Oil until level reaches the
bottom edge of fill hole.
FILLING OIL RESERVOIR
NOTE:
NOTE:
Bottom Edge