MK Diamond MK-2000 Gas Saws - Manual (Page 10)

10
Engine power ratings are calculated by the individual engine manufacturer and the rating method may
vary among engine manufacturers. Users are advised to consult the engine manufacturer’s owner’s
manual and website for specific information regarding engine power rating and maintenance.
GENERAL DESCRIPTION
SPECIFICATIONS
BLADE CAPACITY
MASONRY TYPES
SPRING ASSISTED CUTTING HEAD
MK-2000 GAS SAW PRODUCT SPECIFICATIONS
the MK-2000 Gas Saw is designed for use with a 14-inch diameter segmented wet or dry MK Dia-
mond blade with a .110 to .375 inch cutting width.
The MK-2000 Gas Saw can cut a variety of masonry types including, cinder block, slump stone block,
wall brick, paver brick, concrete block and cylinders, roofing tile, marble, granite, decorative rock or
almost any other non-ferrous material.
NOTE: the MK-2000 Gas Saw is not designed to cut plastic or metals.
the MK-2000 Gas Saw is designed with a spring-assisted cutting head to allow for easier step cut-
ting. The Cutting Head can be locked in the down position when cutting smaller pieces.
ENGINE SPECIFICATIONS
PRODUCT SPECIFICATIONS
Operated and used according to this manual, the MK-2000 Gas Saws will provide years of dependable
service.
The MK-2000 Gas Saws are engineered as portable brick saws powered by either a Honda, Robin,
Kohler or Vanguard engine. The saw is capable of cutting masonry up to five (5) inches (127 mm) in
height, sixteen (16) inches in length in a single pass.
Motor specifications for the MK-2000 Series Saw are listed below.
MK-2005H MK-2006R MK-2007K MK-2006V
Motor/Engine Honda Subaru Kohler Vanguard
Power GX160 SP210 CH270 13H3
Blade Capacity 14” (356mm) 14” (356mm) 14” (356mm) 14” (356mm)
Arbor Size 1” (25mm) 1” (25mm) 1” (25mm) 1” (25mm)
Length of Cut 16” (406mm) 16” (406mm) 16” (406mm) 16” (406mm)
Depth of Cut 5” (127mm) 5” (127mm) 5” (127mm) 5” (127mm)
Shipping Method truck truck truck truck
Motor RPM 3,600 3,600 3,600 3,600
Blade RPM 2,550 2,550 2,550 2,550
L x W x H 42” x 24” x 39” 42” x 24” x 39” 42” x 24” x 39” 42” x 24” x 39”
L x W x H (mm) 1067 x 610 x 991 1067 x 610 x 991 1067 x 610 x 991 1067 x 610 x 991
Weight 171 lbs (77.5 kg) 171 lbs (77.5 kg) 171 lbs (77.5 kg) 171 lbs (77.5 kg)
Part # 155961 159885 167999 169947