Welch Allyn Propaq Encore Monitor - User Manual - Manual (Page 11)

Update to Directions for Use and Reference Guide English Update: Propaq Encore Monitor 3
Warnings
WARNING When taking NIBP measurements, periodically observe the
patient’s limb to make sure that the circulation is not impaired for a prolonged
period of time. Also make sure the blood pressure cuff is properly placed
according to the Propaq Encore Directions for Use or Propaq Encore Reference
Guide. Be especially careful when using the short-term automatic mode
(TURBOCUF). Prolonged impairment of circulation or improper cuff placement
can cause contusions.
WARNING The range of values measured by the monitoring parameters is
provided in the Specifications section of the Propaq Encore Directions for Use or
Propaq Encore Reference Guide. Operation of the monitor outside the range of
specified values is not recommended and may cause inaccurate results.
WARNING Electronic equipment that emits very strong electromagnetic or
radio frequency signals can cause electrical interference with monitor operation,
including causing the monitor to turn off power. Avoid operating this monitor near
such equipment. For guidance about electromagnetic emissions and the
recommended separation distance between the monitor and such equipment,
refer to the specifications section of this manual.
WARNING For best product performance and measurement accuracy, use only
accessories supplied by Welch Allyn or recommended in the Welch Allyn
Products and Accessories booklet (P/N 810-0409-XX). Use accessories according
to your facility’s standards and the manufacturer’s recommendations. Always
refer to the manufacturer’s Directions for Use. Use of accessories not
recommended by Welch Allyn may result in increased electromagnetic
emissions or decreased electromagnetic immunity of the equipment.