Welch Allyn Spot Vital Signs LXi - User Manual - Manual (Page 72)

62 Maintenance and Service Welch Allyn Spot Vital Signs LXi
Braun ThermoScan PRO 4000
Welch Allyn supplies a rechargeable battery pack with the Braun ThermoScan PRO 4000
thermometer.
1. Open the battery compartment.
2. Remove the battery pack.
3. Clean the two internal battery charging contacts on the Braun ThermoScan PRO 4000
with a swab slightly dampened with alcohol.
4. Install the new battery pack, verify the poles are in the right direction.
5. Slide the battery door back in until it snaps into place.
If the battery is completely discharged, the LEDs will not illuminate. Allow the unit to
charge at least 15 minutes before proceeding. (Overnight charging is recommended.)
Caution Do not use alkaline batteries in the Braun ThermoScan PRO 4000.
Welch Allyn supplies a rechargeable battery pack with the Braun ThermoScan
PRO 4000 thermometer.
The battery is a rechargeable battery and must be recycled or disposed
of properly according to national or local regulations.
1
4 5
2 3