Welch Allyn Spot Vital Signs LXi - User Manual - Manual (Page 39)

3
29
Internal Configuration
You can change several device operating parameters in the Internal Configuration Mode.
When changed, these settings become the default power-up settings. You will also see
non-changeable device configurations for technical service purposes.
To Enter the Internal Configuration Mode:
1. Turn the Spot LXi off.
2. Press and hold the Select and Power buttons for 5 seconds. The device enters the
Internal Configuration Mode and the Configuration Menu screen appears on the
display.
Figure 7. Internal Configuration Mode Menu
3. Use the Navigation buttons to move through the menu options and then press the
Select button to access the options or accept a change. See the following tables for
descriptions of the menu options.
4. Press the Power button to exit the Internal Configuration Mode.
Select
Configuration Menu
Version
Numbers Manual
Parameters
External
Devices
Save Readings
Buttons
Lockout
Defaults
Event Log
Battery
Date/Time
Blood Pressure
Temperature
Location
Identifier
Contrast