Welch Allyn Spot Vital Signs LXi - User Manual - Manual (Page 41)

Directions for Use Internal Configuration 31
Table 4. Blood Pressure Menu Options
Setting Description
BP Calibration Check Prepares the Spot LXi for calibration. Only qualified personnel should verify the Spot
LXi blood pressure calibration. For more details, see “Calibration” on page 63.
Blood Pressure Units mmHg or kPa.
Mean Arterial Pressure (MAP) On or off.
Table 5. Temperature Menu Options
Setting Description
Temperature Units Fahrenheit (°F) or Celsius (°C).
Temperature Mode SureTemp Plus models only: Oral, Pediatric Axillary, Adult Axillary, and Last Mode. In
Last Mode the device takes the next temperature in the mode in which the previous
temperature was measured. Rectal Mode is available only when the rectal probe (red
ejection button) and probe well are attached.
Table 6. Manual Parameters Menu Options
Setting Description
Height On or off.
Height Units Inches (in) or centimeters (cm).
Height Default Changes the default patient height displayed in the Navigation Window.
Weight On or off. Even if weight is enabled here, if weight scale is enabled in the External
Devices Menu, you cannot manually enter the weight.
Weight Units Pounds (lb) or kilograms (kg).
Weight Default Changes the default patient weight displayed in the Navigation Window.
Respiration On or off.
Pain Level On or off.