Welch Allyn Spot Vital Signs LXi - User Manual - Manual (Page 65)

Directions for Use Specifications 55
Mechanical
Electrical
Battery
Sealed lead acid, with external charger.
The Spot LXi battery is 90 to 100% charged after 6 hours of charging.
The rechargeable batteries in the Braun ThermoScan PRO 4000 thermometer requires an
additional 1 hour to charge.
The battery automatically charges when Spot LXi is powered through the AC power
transformer. An operator can use the device while the battery is charging; however, the
battery charges faster when the instrument is not in operation.
Environmental
Patents
The Spot LXi is covered under the following patents: 6,827,488; 6,971,790; and other
patents pending.
Dimensions Height: 10.63“ (27 cm)
Length/Braun: 8” (20.32 cm)
Length/SureTemp Plus: 7.5” (19 cm)
Depth: 5.25” (13.34 cm)
Weight 7.5 lbs (3.4 kg)
Mounting Self-supporting on rubber feet
Custom mobile stand
Custom wall mount
Portability May be hand-carried when held by the rear handle
Power Requirements Patient-rated transformer is connected to AC mains:
100-240V, 50-60Hz, 0.4A or internal power: 6Vdc, 6Ah
WARNING This device is not suitable for use in the presence of a flammable
anesthetic mixture with air or oxygen or nitrous oxide. An explosion may result.
Operating Temperature 50° to 104° F (10° to 40° C)
Storage/Transport Temperature Device with SureTemp Plus: -13
 to 131F (-25 to 55C)
Device with Braun ThermoScan PRO 4000: -4
 to 122F (-20 to 50C)
Relative Humidity 15 to 95% (non-condensing)
Operating Altitude -557 to 16,000 ft. (-170 to 4877 m)