Welch Allyn Spot Vital Signs LXi - User Manual - Manual (Page 31)

Directions for Use Controls, Display Window, and Connections 21
Display Window
Before using Spot LXi for the first time, you must program an initial configuration screen.
1. Press the Power button. The display window shows the initial configuration screen.
Figure 3. Initial Configuration Screen
2. Use the Select button to access the options and accept the entries, and use the
Navigation buttons to move through the menu.
3. The word “Exit” appears at the bottom of the list after you have programmed all
items in the menu. You must program all items before you can start to use the device.
4. Scroll to Exit and press the Select button to save the entries.