Welch Allyn VS100 Welch Allyn Vision Screener - User Manual - Manual (Page 20)

P/N 20146 Rev A Page 20
2. Verify file name is ‘SpotSubjects.csv’ or ‘DesiredLocation.csv’.
NOTE: If labeling your subject file(s) with a location, the vision screener will import all files found
on the USB drive at the same time.
3. Follow the import procedures to load the file onto the vision screener. To verify the file was
imported successfully:
4. Return to the Home screen and go to the Queue icon to view the new records.
Custom Banner
Welch Allyn offers the ability to add a custom banner to the bottom of the printable reports. Please
note that Welch Allyn does not supply custom banners. You will need to create your banner using
the specifics below:
• Banner files must be named “banner.png”
• No larger than 1MB
•
Image must be 1376 x 240 pixels
To add a custom banner:
1. Place the banner.png file on the root/top-level directory of the USB.
2. Insert the USB in the vision screener. Go to Tools, then select Import/Export.
3. The import file option will highlight; select Import.
To verify that the file was imported successfully:
1. Screen a new subject or select a completed record and print the report.
2. Your new banner will be printed on the bottom of the report.
Web Access
When connected to a wireless network, the vision screener gives you the ability to view files from a
web browser (Internet Explorer, Firefox, Safari, etc.) on a PC on the same network.
To access the webserver on the vision screener:
1. From your computer, open a web browser; enter the devices IP address in the address bar (this is
located on the top black bar on the Home Screen).