Vintage Cellars Wine Guardian Split System Manual - Manual (Page 8)

3
Receiving, Inspecting and Unpacking the Wine Guardian Unit
NOTE: Wine Guardian units are factory assembled and tested prior to shipment. The
Wine Guardian Ducted Split System consists of two separate components, the Wine
Guardian fan coil and condensing unit. These ship from separate manufacturing
facilities and therefore may not arrive on the same date and time.
Each Wine Guardian component is shipped in a corrugated box. A shipment may include one or
more boxes containing accessories.
 Lift at the designated handhold locations only or fully support from underneath.
 Before opening, inspect the packing crates or boxes for obvious signs of damage or
mishandling.
 Write any discrepancy or visual damage on the bill of lading before signing.
 Inspect all equipment for any sign of damage caused during transit.
 Report all visual or concealed damage to the carrier and file a claim immediately.
 Thoroughly inspect the contents for any visible damage or loose parts.
Review the Packing Slip to Verify
 Model number
 Factory installed options
 Unit accessories
If any items listed on the packing slip do not match your order information, contact the place of purchase
immediately.
Check the fan coil unit for:
 An electrical power cord
 A remote interface controller with communications cable plugged into side of unit
 A drain line coming out of the unit
 A 24 volt contactor and enclosure
 One supply duct collar and one return duct collar
Check the condensing unit for :
 Weather proof enclosure, top and sides
 Installation, Operation and Maintenance manual
IMPORTANT
If this procedure is not followed, the shipping company may reject the claim and the
consignee may suffer the loss. Do not return the shipment to the factory.