Vintage Cellars Mini Ceiling Mount - Manual (Page 8)

Page 6 | 1-800-343-9463
MCM 082814
Receiving and Inspecting the System
• Lift only at the designated hand hold locations on the shipping container or fully support the unit from
underneath. A shipment may include one or more boxes containing accessories.
• Inspect the packaging for any obvious signs of damage or mishandling before opening the container.
• Note any discrepancies or visual damage on the Bill of Lading before signing.
• Place the box containing the unit on a tabletop to prepare it for testing prior to installing.
• Sit unit upright for 24 hours.
Note: WhisperKOOL units are manufactured in the USA and tested prior to shipment.
Review the Packing Slip to Verify Contents
• Check the model number to ensure it is correct.
• Check that all factory options ordered are listed.
If any items listed on the packing slip do not match your order information,
contact WhisperKOOL Customer Service immediately.
Check the Evaporator Unit (Fan Coil Unit) Box for the Following Contents:
RECEIVING & INSPECTING THE SYSTEM
Please leave the unit in its original box until you are ready for installation. This will allow you to move the product
safely without damaging it. When you are ready to remove the product from the box, refer to the installation
instructions.
TIP: Save your box and all packaging materials. They provide the only safe means of transporting/shipping the unit.
• Mini Ceiling Mount Evaporator Unit (Fan Coil Unit)
Accessory Kit#1:
• (1) Mini Ceiling Mount Owner’s Manual
• (1) Split System Warranty Checklist
• (1) 50’ Bottle Probe
• (1) Anti-Siphoning Device
Accessory Kit#2:
• (1) Remote Keypad
• (1) 50’ Keypad Connection Cable
• (1) Remote Box
• (1) Mounting Bracket
Accessory Kit#3:
• (1) 1/4” Sight Glass
• (1) 1/4” Filter Drier
• (1) 10 ft. 1/4” Drain Line
Check the Condenser Box for the following contents:
• Mini Ceiling Mount Condensing Unit
Accessory Kit#4 (Inside Kit #3):
• (12) #14 2” Phillips Pan Head Screw
• (1) 1/4” Drain Tube Connector
• (12) #8 x 3/8” Black Oxide Screws
• (2) 7/8” Hole Plugs
• (1) Small Strain Relief
• (2) Cable Ties
• (2) Cable Tie Holders
• (1) Strain Relief
• (1) Ratcheting Strain Relief
• (1) 1” Hole Plug