Crestron electronic Multimedia Presentation System 300 MPS-300 - Manual (Page 78)

Multimedia Presentation System 300 Crestron MPS-300
Restore Default Settings The MPS-300 can be restored to its default factory settings from the front panel.
Users can select to restore the audio settings or to restore the audio settings, source
names, output names, and function names.
• To restore audio settings only:
⇒ Access the Control Setup menu as described on page 66.
⇒ Press the k or j buttons until “Defaults” is displayed on the LCD and
press ENTER to display the Restore Defaults menu.
Restore Defaults Menu-Audio Settings Only
Restore Defaults
Aud. settings only
⇒ Press the k or j buttons until “Aud. settings only” is displayed on the
LCD and press ENTER.
Confirm Restore Audio Default Settings Only
Reset all audio?
No
⇒ Press the k or j buttons until “Yes” is displayed on the LCD and
press ENTER to restore the audio settings to the factory defaults. To
cancel, press the k or j buttons until “No” is displayed on the LCD
and press ENTER.
• To restore all factory default settings:
⇒ Access the Control Setup menu as described on page 66.
⇒ Press the k or j buttons until “Defaults” is displayed on the LCD and
press ENTER to display the Restore Defaults menu.
74
• Multimedia Presentation System 300: MPS-300
Operations Guide – DOC. 6529B