Crestron electronic Multimedia Presentation System 300 MPS-300 - Manual (Page 44)

Multimedia Presentation System 300 Crestron MPS-300
Program Bass Controls
Program Bass
0db
• Adjust the Program Bass level with the j and k buttons. Press the k
button to increase the bass level. Press the j button to lower the bass level.
NOTE: While adjusting the Program Bass level, the Program Volume
level can be adjusted by turning the volume control clockwise to raise the
volume, or counterclockwise to lower the volume. When adjusting the
volume, the display will change to indicate the volume level.
• Press MENU or ENTER to save changes and return to the previous screen.
Set the Program Treble Level To set the Program Treble level:
• Access the Program Output menu as described on page 38.
• Press the k or j buttons until “Treble” is displayed on the LCD and press
ENTER to open the Program Treble controls. The current treble level will
be displayed.
Program Treble Control
Program Treble
0db
• Adjust the Program Treble level with the j and k buttons. Press the k
button to increase the treble level. Press the j button to lower the treble
level.
NOTE: While adjusting the Program Treble level, the Program Volume
level can be adjusted by turning the volume control clockwise to raise the
volume, or counterclockwise to lower the volume. When adjusting the
volume, the display will change to indicate the volume level.
• Press MENU or ENTER to save changes and return to the previous screen.
40
• Multimedia Presentation System 300: MPS-300
Operations Guide – DOC. 6529B