Crestron electronic MPC Media Presentation Controller MPC-M10/20/25 User Manual
Purpose, Specifications

Crestron MPC-M10/20/25
Media Presentation Controller
MPC Media Presentation
Controller™: MPC-M10/20/25
Purpose
The purpose of this addendum is to provide additional information not supplied with
the original MPC-M10/20/25 Operations & Installation Guide (Doc. 6701B).
Specifically, this addendum provides for additional “Available Accessories” in the
MPC-M10/20/25 “Specifications” table, which appeared on page 7.
Specifications
In the “Specifications” section, the “Available Accessories” information should read
as follows:
Available Accessories
C2N-MNETGW
infiNET
Gateway
C2N-VEQ4
4-Channel Volume/EQ Module
CLS-C6(M)
iLux Integrated Lighting System
CLW-DIM Series
Wall Mount Dimmers
CLW-DIM1RF
infiNET
Dimmer
CLW-SW Series
Wall Mount Switches
CLW-SW1RF
infiNET
Switch
CNSP-XX
Custom Serial Interface Cable
IRP2
IR
Probe
MP-B10
Media
Presentation Button Panel B10
MP-B20
Media
Presentation Button Panel B20
MP/MPC/IPAC_FRONT_LABEL-
(BLANK,
ENGRAVED)-B-T
Set of custom engravable backlit labels,
white on black
MP/MPC/IPAC_FRONT_LABEL-
(BLANK,
ENGRAVED)-W-T
Set of custom engravable backlit labels,
black on white
Crestron Electronics, Inc.
Addendum #1 for DOC. 6701B
15 Volvo Drive Rockleigh, NJ 07647
09.08
Tel: 888.CRESTRON
Fax: 201.767.7576
Specifications subject to
www.crestron.com
change without notice.