Crestron electronic Multimedia Presentation System 300 MPS-300 - Manual (Page 45)

Crestron MPS-300 Multimedia Presentation System 300
Set the Program Minimum
Volume The Program Minimum Volume control is used to set the lowest volume setting of
the PROGRAM output. The RECORD and SPEECH outputs are not affected by
changes made to the Program Minimum Volume level.
To set the Program Minimum Volume level:
• Access the Program Output menu as described on page 38.
• Press the k or j buttons until “Min Volume” is displayed on the LCD and
press ENTER to open the Program Minimum Volume controls.
Program Minimum Volume Control
Prog. Min Volume
30%
• Adjust the Program Minimum Volume level with the j and k buttons.
Press the k button to increase the Program Minimum Volume level. Press
the j button to lower the Program Minimum Volume level. The highest
Program Minimum Volume setting is 30%.
NOTE: While adjusting the Program Minimum Volume level, the
Program Volume level can be adjusted by turning the volume control
clockwise to raise the volume, or counterclockwise to lower the volume.
When adjusting the volume, the display will change to indicate the volume
level.
• Press MENU or ENTER to save changes and return to the previous screen.
Set the Program Maximum
Volume The Program Maximum Volume control is used to set the highest volume setting of
the PROGRAM output. The RECORD and SPEECH outputs are not affected by
changes made to the Program Maximum Volume level.
To set the Program Maximum Volume level:
• Access the Program Output menu as described on page 38.
• Press the k or j buttons until “Max Volume” is displayed on the LCD and
press ENTER to open the Program Maximum Volume controls.
Program Maximum Volume Control
Prog. Max Volume
75%
Operations Guide – DOC. 6529B Multimedia Presentation System 300: MPS-300
• 41