Crestron electronic Multimedia Presentation System 300 MPS-300 - Manual (Page 64)

Multimedia Presentation System 300 Crestron MPS-300
• Press the k or j buttons until the output to be named is displayed on the
LCD and press ENTER. The cursor is placed after the last character in the
output name.
Name the Output
Output 1_
DEL INS < >
• Turn the volume control clockwise or counterclockwise (or press the k or
j buttons) to select a new letter (uppercase or lowercase) or number. Move
the cursor by pressing the soft buttons labeled < or >. Each output name can
be up to 14 characters in length. To delete a character, position the cursor
under the character to be deleted and press the soft button labeled DEL. To
insert a space, position the cursor where the space is to be inserted and
press the soft button labeled INS.
• Press ENTER to save the new name and return to the Output Naming menu
or press MENU to cancel the operation and return to the Output Naming
menu.
• After all outputs have been named, press MENU to return to the Video
Setup menu.
Network Setup
The network settings of the MPS-300 can be configured and reviewed from the front
panel using the Network Setup menu.
NOTE: Some changes to network settings may require a reboot to take effect. The
system will automatically reboot when necessary.
Access the Network Setup
Menu To access the Network Setup menu:
• Access the menu as described on page 36. Press the k or j buttons until
“Network Setup” is displayed on the LCD.
• Press ENTER to open the Network Setup menu.
• To exit the Network Setup menu, press MENU.
Set the IP Address The MPS-300 uses TCP/IP communications for communications between network
devices, a PC, and RoomView Help Desk software. The IP address can be manually
set or obtained from a DHCP server. For information on using DHCP to obtain an IP
address, refer to “Set the DHCP Mode” on page 62. To manually set an IP address:
• Access the Network Setup menu as described above.
• Press the k or j buttons until “IP Address” is displayed on the LCD and
press ENTER to display the IP Address controls. The current IP address
will be displayed.
60
• Multimedia Presentation System 300: MPS-300
Operations Guide – DOC. 6529B