Crestron electronic Multimedia Presentation System 300 MPS-300 - Manual (Page 74)

Multimedia Presentation System 300 Crestron MPS-300
NOTE: This information can be viewed using Crestron Toolbox. For more
information, refer to the Crestron Toolbox help file.
• Access the Control Setup menu as described on page 66.
• Press the k or j buttons until “Info” is displayed on the LCD and press
ENTER to display the Info menu.
Display the Info Menu
Info
REMS HW NET OPS
• To view program information, press the soft button labeled REMS.
Display the Program Information
Program Boot Directo
<< >>
⇒ Press the k or j buttons to see other information. If partial
information is displayed, press the soft buttons labeled << or >> to
view the rest of the information.
⇒ Press the MENU button to return to the Info menu.
• To view hardware information, press the soft button labeled HW.
Display the Hardware Information
Current Hardware Con
<< >>
⇒ Press the k or j buttons to see other information. If partial
information is displayed, press the soft buttons labeled << or >> to
view the rest of the information.
70
• Multimedia Presentation System 300: MPS-300
Operations Guide – DOC. 6529B