Crestron electronic Multimedia Presentation System 300 MPS-300 - Manual (Page 76)

Multimedia Presentation System 300 Crestron MPS-300
Display the Message Controls
System log:
Top Clear << >>
• To scroll through messages in the log, press the k or j buttons.
• To jump to the beginning of the log, press the soft button labeled Top.
• To jump to the last message in the long, press the soft button labeled Btm
(not shown).
• To view the contents of a message press the soft buttons labeled << or >>.
• To erase the contents of the log, press the soft button labeled Clear.
• Press MENU to return to the Control Setup menu.
NOTE: The contents of the message log can be read and saved using Crestron
Toolbox. For more information, refer to the Crestron Toolbox help file.
Set the Date and Time Use the front panel to set the MPS-300’s date and time.
• Access the Control Setup menu as described on page 66.
• Press the k or j buttons until “Time/Date” is displayed on the LCD and
press ENTER to display the Time/Date controls.
Display the Time/Date Controls
10/16/06 04:08:25PM
DATE TIME
• To set the date, press the soft button labeled DATE. The Date controls will
be displayed.
72
• Multimedia Presentation System 300: MPS-300
Operations Guide – DOC. 6529B