Crestron electronic Multimedia Presentation System 300 MPS-300 - Manual (Page 53)

Crestron MPS-300 Multimedia Presentation System 300
Speech Maximum Volume Control
Spch. Max Volume
75%
• Adjust the Speech Maximum Volume level with the j and k buttons.
Press the k button to increase the Speech Maximum Volume level. Press
the j button to lower the Speech Maximum Volume level. The lowest
Speech Maximum Volume setting is 50%.
NOTE: While adjusting the Speech Maximum Volume level, the Speech
Volume level can be adjusted by turning the volume control clockwise to
raise the volume, or counterclockwise to lower the volume. When adjusting
the volume, the display will change to indicate the volume level.
• Press MENU or ENTER to save changes and return to the previous screen.
Adjust the Speech Startup
Volume The Speech Startup Volume control is used to establish the SPEECH output’s
volume level setting when an input is selected. The RECORD and PROGRAM
outputs are not affected by changes made to the Speech Startup Volume level.
To adjust the Speech Startup Volume level:
• Access the Speech Output menu as described on page 43.
• Press the k or j buttons until “Startup Vol.” is displayed on the LCD and
press ENTER to open the Speech Startup Volume control.
Speech Startup Volume Control
Spch. Startup Vol.
30%
• Adjust the Speech Startup Volume level with the j and k buttons. Press
the k button to increase the Speech Startup Volume level. Press the j
button to lower the Speech Startup Volume level. The highest Speech
Startup Volume setting is 100%.
Operations Guide – DOC. 6529B Multimedia Presentation System 300: MPS-300
• 49