Crestron electronic Multimedia Presentation System 300 MPS-300 - Manual (Page 75)

Crestron MPS-300 Multimedia Presentation System 300
⇒ Press the MENU button to return to the Info menu.
• To view a list of connected network devices, press the soft button labeled
NET.
Display Connected Network Devices
2E: APAD LCD 6-bu
<< >>
⇒ Press the k or j buttons to see other network devices. If the
information for a network device is partially displayed, press the soft
buttons labeled << or >> to view the rest of the information.
⇒ Press the MENU button to return to the Info menu.
• To view information on the MPS-300 operating system, press the soft
button labeled OPS.
Display Operating System Information
MPS-300 Cntrl Eng [v
<< >>
⇒ Press the soft buttons labeled << or >> to view the information that
cannot fit on the display.
⇒ Press the MENU button to return to the Info menu.
• To return to the Control Setup menu, press MENU.
Review System Messages The MPS-300 stores system messages in a message log. The presence of new
messages in the log is indicated when the MSG LED is lit. To review system
messages using the front panel:
• Access the Control Setup menu as described on page 66.
• Press the k or j buttons until “Messages” is displayed on the LCD and
press ENTER to display the Message controls.
Operations Guide – DOC. 6529B Multimedia Presentation System 300: MPS-300
• 71