Crestron electronic Multimedia Presentation System 300 MPS-300 - Manual (Page 23)

Crestron MPS-300 Multimedia Presentation System 300
Connectors, Controls & Indicators (Continued)
# CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
30 OUTPUT 1-4 Contains composite, S-video (Y/C),
component (Y, P
b
, P
r
) and RGBHV outputs on
six BNC connectors and one DB15HD
connector.
Composite/P
b
Output 1:
(1) BNC female, composite video output, or
P
b
of secondary component/HDTV video
output;
Output Level: 1.0 to 1.1 V
p-p
(terminated, with
1 V
p-p
input)
Output Impedance: 75 ohms nominal
Y/Y, C/P
r
OUTPUT 2:
(2) BNC female, S-video (Y/C) video output,
or Y and P
r
of secondary component/HDTV
video output;
Output Level: 1.0 to 1.1 V
p-p
(terminated, with
1 V
p-p
input);
Output Impedance: 75 ohms nominal
COMP/P
b
, Y/Y, C/P
r
OUTPUT 3:
(3) BNC female, configurable as: (1)
Component/HDTV (YP
b
P
r
) video output, or (1)
S-video (Y/C) output, or (1) Composite
output;
Output Level: 1.0 to 1.1 V
p-p
(terminated, with
1 V
p-p
input);
Output Impedance: 75 ohms nominal
RGBHV OUTPUT 4:
(1) DB15HD female, RGBHV (VGA) output;
Format: RGBHV, RGBS, or YP
b
P
r
;
RGB Output Level: 0.7 to 0.75 V
p-p
(terminated, with 0.7 V
p-p
input, unity gain);
RGB Output Impedance: 75 ohms nominal;
Sync Output Level: 4 to 5 V
p-p
;
Sync Output Impedance: 55 ohms;
Sync Polarity: Follows input
31 OUTPUT SELECTION (7) pushbuttons and red LEDs, select output
destination
(Continued on following page)
Operations Guide – DOC. 6529B Multimedia Presentation System 300: MPS-300
• 19