Rice Lake TicketPress - Installation and Operation Manual - Manual (Page 23)

Printer Configuration 19
4.4.1 Baud Rate
Baud Rate
9600
4.4.2 Data Bits
Data Bits
8
4.4.3 Stop Bits
Stop Bits
1
4.4.4 Parity
Parity
None
Value Action
300
Selects the baud rate for the serial interface.
This must be set to match the baud rate setting on the host computer.
600
1200
2400
4800
9600 *
19200
38400
57600
115200
Value Action
8 *
Selects the number of data bits in the serial character frame.
This must be set to match the character size setting on the host computer.
7
Value Action
1
*
Sets the number of stop bits to be used at the end of the serial character frame. This must be set to match
the stop bit setting on the host computer.
2
Value Action
None *
Selects the parity checking requirements for the serial data bits. This must be set to match the parity setting
on the host computer.
Even
Odd