Rice Lake TicketPress - Installation and Operation Manual - Manual (Page 12)

8 TicketPress Operator’s Manual
4.0 Printer Configuration
4.1 Introduction To Setup
The TicketPress printer features simple, easy to use menus for setting the various interface and operating
parameters. These parameters usually only need to be set once at the time of installation. These values are stored
in nonvolatile memory, which means that they will remain set even if the printer is turned off.
Note
The value that is last displayed before advancing to the next item is the value that will be saved
when Setup mode is exited.
Figure 4-1. Control Panel Setup Buttons
4.1.1 Entering Setup
1. To enter Setup, with printer on.
2. Press and hold . Entering Setup Menus is displayed as shown below.
Entering
Setup Menus
4.1.2 Selecting a Menu
After the above message has been shown, the display will show the first menu choice available, which is the
OPTIONS menu as shown below.
Options
To cycle through the available menus, press . This will advance you to the INTERFACE menu, the Exit
Setup Menus choice, and back to the OPTIONS menu.
Options Interface Exit Setup Menu
Save Changes