Rice Lake TicketPress - Installation and Operation Manual - Manual (Page 15)

Printer Configuration 11
Date
The two formats shown are selected by setting the Location to US or Intl.
Value Display Action
US *
Date
mm/dd/yy
Each portion of the date will be highlighted and may be changed by pressing
.
Press to highlight the next value to be set, or press and hold to
advance to ID.
Intl
Date
dd/mm/yy
Note To exit when Time/Date is turned on press twice until Options is displayed.
4.2.2 ID Action (Weight Extraction Mode Only)
ID Action
Count
This item sets how the five digit ticket ID number is to be controlled. The value
selected determines how the number entered in ID Number will be used.
Value Action
Count Up * Value will be incremented BEFORE it is printed.
Constant Value Value entered here will be printed on every ticket and will not be incremented.
Count in Range Value will be incremented within a specified range, BEFORE it is printed.
Note With ID Min on display and curser flashing on the I of ID, press to toggle to ID Max.

If ID Max is less than ID Min value will default to ID Min.
Note
When “Loc,Time,Date,ID” is set to “Yes”, you may suppress printing the ticket ID by setting “ID
Action” to “Constant Value” and setting the ID number to all spaces .
Value Display Action
ID Number
ID Number
00000000
Eight characters of All Spaces (ASCII SP) … 00000000* … 99999999
This item displays the value of the LAST ticket ID value that was printed.
Changing this value will affect the ID printed on the next ticket.
If “ID Action” is set to Count UP or Count in Range, this value will be
incremented BEFORE it is printed.
If “ID Action” Constant Value is selected, the value entered here will be printed
on every ticket and will not be incremented.
This value is entered one character at a time, left to right, by pressing to
select the value.
Leading spaces are represented by an underscore character (“_”). Once a
non-space character has been entered, the remaining characters must be
numeric.
To advance to the next character position, press .
After entering the last character, press to advance to the next menu item.
Note
Must be set to “No Value” to turn off ID values.