Rice Lake TicketPress - Installation and Operation Manual - Manual (Page 21)

Printer Configuration 17
4.3 Security Menu
The SECURITY MENU is for system administrators who want to be able to set up a printer and then “lock out”
operator changes to the various menus. This method of security may be set independently for the menu areas
described below.
When set to Edit Allowed , the user is allowed to make changes to any item in that menu section. When set to
View Only , the operator can look at the settings, but cannot edit, or change the values. When set to Initialize , the
printer will reset all values in that menu to the factory default values and security will be set back to Edit
Allowed.
The SECURITY menu is more difficult to enter than other menus. To be able to access this menu:
1. Turn the printer off if it is on.
2. Then press and hold to turn printer on.
3. When printer has powered up, press to access SECURITY menu.
A sample printout of the security menu is shown below:
Figure 4-6. Security Test Menu Example
4.3.1 Options Menu
This item selects whether items in the OPTIONS menu can be edited or only viewed
by the operator.
Value Action
Edit Allowed
* Allows edits to be made.
View Only Options can only be viewed by operator.
Initialize Reset the value of all the items in the options menu to factory default values.
Options
Edit Allowed
An example of an Options menu ticket is shown below.
Figure 4-7. Options Menu Example