Rice Lake SURVIVOR SST3 Washdown Printer - Manual (Page 29)

26 SST3 Installation Manual
4.5.2 Configuring Label Format in an RLWS Indicator
Use the following steps to configure label format in an RLWS indicator:
1. Determine the operation mode in which you are printing. This step is important to make sure the correct
format is stored in gross, net or other format modes available in the indicator.
2. Create the format.
4.5.3 Gross Weight Label Format Example
The following is a format string example for a gross weight label configured in an RLWS indicator.
Figure 4-2. Simple Gross Weight Data Stream/ASCII Example
Figure 4-3. Simple Gross Weight Label Example
Sample download label is available at www.ricelake.com/supports downloads/printers/label templates.
2 48 48 48 49 48 48 48 48 49 49 51 49 76 60 62 71 60 48 53 48 62 76 78 69
0 0 1 0 1 0 0 0 1 3 1 L STX > G < 5 0 0 0 E > L N <
Key In
Data Stream
60
<
62 76 78
> L N
10000 LB