Rice Lake Counterpart Configurable Counting Indicator - Installation and Operation Manual V2.3 - Rev C User Manual
Page 88

82
Counterpart Counting Scale Indicator
The 500-character limit of each print format string includes the output field length of the print formatting
commands, not the command length. For example, if the indicator is configured to show a decimal point, the
point), one space, and a two-digit units identifier. The two header formats as limited to 100 characters each.
The default Counterpart print formats are shown in Table 7-2 and Table 7-3:
Format
Default Format String
Used When
NFMT
N
"Tare:
"Net: P1 Normal mode, tare in PALFMT N When Print Pallet CFMT N A225,400,1,4,1,1,N,"TARE W" Count mode GFMT N 4,1,1,N” Normal mode, no tare in TOTAL N QUANTITY>" >B195,32,1,3,2,4,101,N," Totalization mode SPFMT N 1,1,4,4,N,”QTY Setpoint mode ACCFMT N QUANTITY" 5,32,1,3,2,4,101,N," Accumulator enabled Table 7-2. Default Print Formats Format Default Format String Sample Output H1 Company Name Company Name, Street Address, City, ST ZIP H2 Company Name Company Name, Street Address, City, ST ZIP Table 7-3. H1, H2 Formats Note"
system
A179,25,1,4,1,1,N,"Part Name:
softkey is pressed
A47,16,1,4,1,1,N,"" ”
system"
A61,32,1,5,1,1,N,"BOX COUNT: "
A61,32,1,5,1,1,N,"ACCUMULATIONS:
and displayed