Rice Lake Counterpart Configurable Counting Indicator - Installation and Operation Manual V2.3 - Rev C User Manual
Page 86
80
Counterpart Counting Scale Indicator
Command
Description
Supported Ticket Formats
Gross weight, current scale
GFMT, NFMT, TOTALFMT,
PALFMT, CFMT, ACCFMT
HDRFMT1, HDRFMT2
Gross weight, scale n
Net weight current scale
Net weight, scale n
Tare weight in displayed units. Add four before bracket to print header
Tare weight, scale n
Accumulated weight, current scale
Accumulated weight, scale n
Number of accumulations, current scale (5-digit counter)
Number of accumulations, scale n
Date of last accumulation, current scale
Date of last accumulation, scale n
Time of last accumulation, current scale
Time of last accumulation, scale n
Unit ID number
Consecutive number
Piece count, current scale
Piece count, scale n
New line (nn = number of termination (
Space (nn = number of spaces)*
Surpress unis. Toggle weight data format (formatted/unformatted)**
Time
<nnn>
ASCII character (nnn=decimal value of ASCII character). Used for
inserting control characters (STX, for example) in the print stream.
Date
Time & Date
Header 1
Header 2
Loaded ID Code - 32 characters maximum
Loaded ID Description - 32 characters maximum
Loaded ID Location - 12 characters maximum
Loaded ID Part Number - 32 characters maximum
Loaded ID Lot - 32 characters maximum
Loaded ID Units - 1 character maximum
Loaded ID Tare - 9 characters maximum (range 0.0 to 9999999.0)
Loaded ID Unit Weight - 9 characters maximum (range 0.0 to
9999999.0)
Loaded ID Quantity - 11 characters maximum (range -2000000000 to
2000000000)
Totalization Value - 11 character maximum (range -2000000000 to
2000000000). When not in totalization mode, the value will be 0.
Totalization Count - 4 characters maximum. When not in totalization
mode, the value will be 0.
Print totalized weight. When not in totalization mode, the value will be 0.
Suppresses all (units, decimal, leading, spaces)
Supress units
Supress leading spaces
Table 7-1. Print Format Commands