Rice Lake CLS-920i Cargo Lift Scale Installation Manual - Manual (Page 85)

CLS-920i Installation Manual 82
10.4 PS/2 Keyboard Interface
Serial port 2 on the 920i CPU board provides a PS/2-type keyboard interface for use with a remote keyboard. To
use the keyboard interface, set the INPUT parameter for Port 2 (under the SERIAL menu) to KEYBD .
Table 10-7 summarizes the 920i -specific functions provided by the keyboard interface; most other alphanumeric
and navigational keys provide functions equivalent to those typical for PC operation. Menu parameters and serial
commands that affect indicator keypad operation (including the KBDLCK, ZERONLY, and KLOCK serial
commands) also affect the remote keyboard.
Table 10-7. PS/2 Keyboard Functions
Key Function
F1 Softkey 1
F2 Softkey 2
F3 Softkey 3
F4 Softkey 4
F5 Softkey 5
F6 (Alt+Z) ZERO key
F7 (Alt+G) GROSS/NET key
F8 (Alt+T) TARE key
F9 (Alt+U) UNITS key
F10 (Alt+P) PRINT key
F11 Not used
F12
Print Screen Same as PRINT key, in both
normal and setup modes
Note
The keyboard interface is not hot-pluggable. Disconnect power to the 920i before plugging the keyboard cable
into the Port 2 connector.