Rice Lake CLS-920i Cargo Lift Scale Installation Manual - Manual (Page 61)

CLS-920i Installation Manual 57
Intervals Display Time 1.7 0 20 Second This is the amount of time that messages will
be displayed before disappearing.
Data Entry
Timeout 60.0 240 When a prompt is open and the 920i is
expecting the user to enter data, the prompt
will close after a number of seconds.
Configuration
Exit Timeout 120.0 240 If you have pressed the Supervisor Menu
softkey and are in the configuration
parameters list (this list), and no keys have
been pressed in a number of seconds, the
920i will exit and return to the main menu.
Password
Timeout 20.0 240 Once a valid password is entered to access
the Supervisor Menu, and then the
Supervisor Menu is exited by the user, you
have this number of seconds to re-enter the
Supervisor Menu without having to re-key
your password.
Polling
Frequency 0.25 5 This setting is no longer used.
Clock Time Time Selecting Time will prompt the user to enter
the time in this format, HHMM. Use this to
correct the time during daylight savings time,
small descrepancies in time, or to set the time
for the first time.
Date Date Selecting Date will prompt the user to enter
the date in this format DDMMYY. Use this to
set the date for the first time.
Time Format HH:MM XM String These settings are no longer used.
Date Format MM/DD/YY String
Password Enter New
Password 0 String Enter New Password.
Zero
Inclinometer User will be
prompted, Are
you sure? Select Yes or No softkey Command This function is used to set the smart junction
box (iQube) pitch and roll inclinometer to 0
degrees. Make sure the forks are level before
pressing the Yes softkey.
Clear PRO
Trans DB User will be
prompted, Are
you sure? Select Yes or No softkey Command This function clears the PRO# transaction
database.
Select the Yes or No softkey
Parent List Parameter Name Default Value Min Max Type Description
Table 5-1. Supervisor List Parameters