Rice Lake CLS-920i Cargo Lift Scale Installation Manual - Manual (Page 23)

CLS-920i Installation Manual 18
3.5.4 Calibrating the Lithium-Ion Battery
In order to keep the battery fuel gauge as accurate as possible, it is necessary to occasionally run the pack through a
recalibration cycle. To do this, place the battery in the left bay of the charger and press the button on the front label
(see Figure 3-10). This will initiate the recalibration sequence in the left bay only. The process can take up to nine
hours to complete and a recommended recalibration should be done once quarterly to keep the battery accurate.
3.5.5 Battery Removal
The lithium-ion battery itself is housed inside of the battery box and is encased in a foam core protecting it from
vibration.
Figure 3-11. Lithium-ion Battery Box Opened
Figure 3-12 shows how to pull the lithium-ion battery out of the battery box.
Figure 3-12. Pulling the Lithium-Ion Battery Out
If the battery is not put back into the battery box correctly or the battery is not functioning correctly, the following
error message is displayed on the 920i indicator.
Figure 3-13. Comm Error Message