Rice Lake CLS-920i Cargo Lift Scale Installation Manual - Manual (Page 17)

CLS-920i Installation Manual 12
3.0 Indicator Hardware Setup
3.1 Mounting the 920i Indicator
Location of the indicator is a matter of operator preference and should be installed in a location that allows for free
vision.
The universal mounting bracket which is included (shown in Figure 3-1 with the optional bar code scanner),
enables the indicator to be mounted to the safety cage using the supplied hardware.
Figure 3-1. CLS Mounting Bracket
The indicator tilt position is adjustable by using a wrench so you can pick the best viewing angle for the operator.
Vibration isolators are also included in the supplied mounting bracket hardware. This cushions the indicator from
vibration. These vibration isolators are shown below in Figure 3-2.
Vibration
Isolators
Figure 3-2. Vibration Isolator Control Location