2 menu structures and parameter descriptions, 1 configuration menu, Configuration menu – Rice Lake 420 Plus HMI Digital Weight Indicator Installation Manual User Manual
Page 21

420 Plus Installation Manual - Configuration
17
To select a parameter, press or to scroll left or
right until the desired menu group appears on the
display, then press to move down to the submenu or
parameter you want. When moving through the menu
parameters, the default or previously selected value
appears first on the display.
To change a parameter value, scroll left or right to view
the values for that parameter. When the desired value
appears on the display, press to select the value and
move back up one level. To edit numerical values, use
the navigation keys to select the digit and to increment
or decrement the value or use the numeric keypad. (see
When editing numeric values, press
or
to change the
digit selected. Press
or
to increment or decrement the
value of the selected digit, or use the numeric keypad.
Press
to
save the value entered and return to the level above.
Figure 3-4. Editing Procedure for Numeric Values
3.2
Menu Structures and Parameter Descriptions
The following sections provide graphic representations of the
420 Plus
menu structures. In the actual menu
structure, the settings you choose under each parameter are arranged horizontally. To save page space, menu
choices are shown in vertical columns. The factory default setting appears at the top of each column in bold type.
Most menu diagrams are accompanied by a table that describes all parameters and parameter values associated
with that menu. Default parameter values are shown in bold type.
3.2.1
Configuration Menu
XXXXXXX
XXXXXXX
XXXXXXX
XXXXXXX
GRADS
10000
0
number
ZTRKBN
ZRANGE
1.900000
MOTBAN
FS+2%
FS+9D
FS+1D
FS
OVRLOA
1
4
2
8
DIGFL1
32
16
64
number
1
4
2
8
DIGFL2
32
16
64
1
4
2
8
DIGFL3
32
16
64
BOTH
PBTARE
NOT
ARE
KEYED
T AREFN
ALGOUT
DIG IN
SETPNT
PROGRM PFORMT
SERIAL
CALIBR
CONFIG FORMAT
8OUT
32OUT
16OUT
64OUT
DFSENS
DFTHRH
2OUT
128OUT
4OUT
2DD
NONE
5DD
20DD
10DD
50DD
200DD
100DD
250DD
15HZ
60HZ
30HZ
7.5HZ
SMPRAT
VERS
number
1
number
Figure 3-5. Configuration Menu